Find your product

Category

Brand

Measurement principle

Application

Implementation

Measurement range

ID-221

ID-221 – oil sheen and hydrocarbon sensor

ID-221 is a Leakwise sensor for continuous detection of oil sheen and hydrocarbons on water surfaces. It is used in environmentally sensitive applications such as groundwater wells, sumps and containment areas where early alarm functionality is critical. It uses electromagnetic absorption to reliably detect oil, and can sense layers as little as 0.3mm thick. The sensor delivers continuous real-time data and alarms, making it ideal for early warning and spill prevention in environmentally sensitive areas.
ID-223

ID-223 – oil sheen detection sensor

ID-223 is a Leakwise sensor designed to detect very thin oil sheens on water surfaces. The sensor provides early warning of minor spills and is used where rapid detection of hydrocarbons is essential to limit environmental impact. Typical areas of use are oil tanks, water separators and sewage systems. The sensor can detect as little as 0.3mm of oil and monitors changes in oil levels up to 20mm. In addition, it can handle different water level variations and can be installed in hazardous environments with the help of protective pipes. The product is ideal for environmental monitoring and compliance with emission control regulations.
PS-220

PS-220 – analog controller for oil detection

PS-220 is an analog controller from Leakwise used to power and process signals from Leakwise oil-on-water sensors. The controller provides alarm handling, relay outputs and signal transmission for spill and leakage monitoring systems.
Avskiljarlarm ASA-01

ASA-01 separator alarm

EX-rated grease and oil separator alarm with built-in IoT gateway. For monitoring grease and oil separators in explosive environments. Electronics unit is compatible with up to three digital measuring ASA sensors, providing reliable separator monitoring.
Ultraljud, vätskor - EchoTREK

EchoTREK for liquids

A series of ultrasonic level sensors in a compact design. 2 or 3/4 wire fed versions. Output signal 4-20 mA, HART, relay, PROFIBUS PA, depending on version. Measuring heights up to 25 m. Threaded or flanged sockets. Several different material choices on the sending part.
ACC2

ACC2 - Afriso Cloud Connect

ACC2 is an electronic unit where 2 analog and 4 digital sensors/detectors/switches or similar can be connected (regardless of manufacturer), as long as it communicates via 4-20 mA, 0-10V or by dry contact. The box is connected to 230 V and then communicates all sensor data via the mobile network to our cloud service solution Afriso Cloud.
Avskiljarlarm ASA-03

ASA-03 separator alarm

EX-rated grease and oil separator alarm with display. Designed for use in environments with a risk of explosion. Electronic unit with the possibility of connecting up to three digital ASA sensors.
Avskiljarlarm ASA-02

ASA-02 separator alarm

EX-rated grease and oil separator alarm with status LEDs. Designed for use in environments with a risk of explosion. Electronic unit with the possibility of connecting up to three digital ASA sensors.