Find your product

Category

Brand

Measurement principle

Application

Implementation

Measurement range

ID-221

ID-221 – oil sheen and hydrocarbon sensor

ID-221 is a Leakwise sensor for continuous detection of oil sheen and hydrocarbons on water surfaces. It is used in environmentally sensitive applications such as groundwater wells, sumps and containment areas where early alarm functionality is critical. It uses electromagnetic absorption to reliably detect oil, and can sense layers as little as 0.3mm thick. The sensor delivers continuous real-time data and alarms, making it ideal for early warning and spill prevention in environmentally sensitive areas.
ID-223

ID-223 – oil sheen detection sensor

ID-223 is a Leakwise sensor designed to detect very thin oil sheens on water surfaces. The sensor provides early warning of minor spills and is used where rapid detection of hydrocarbons is essential to limit environmental impact. Typical areas of use are oil tanks, water separators and sewage systems. The sensor can detect as little as 0.3mm of oil and monitors changes in oil levels up to 20mm. In addition, it can handle different water level variations and can be installed in hazardous environments with the help of protective pipes. The product is ideal for environmental monitoring and compliance with emission control regulations.
Ultraljud, vätskor - EchoTREK

EchoTREK for liquids

A series of ultrasonic level sensors in a compact design. 2 or 3/4 wire fed versions. Output signal 4-20 mA, HART, relay, PROFIBUS PA, depending on version. Measuring heights up to 25 m. Threaded or flanged sockets. Several different material choices on the sending part.
Givare för avskiljarlarm 20m - ES4

Layer probe ES4 5m

Capacitive layer probe for grease or oil layer in separator. Works with separator alarm ES33/OSA/OSA 3
Givare för avskiljarlarm 5m - ES4

Layer probe ES4 20m

Capacitive layer probe for grease or oil layer in separator. Works with separator alarm ES33/OSA/OSA 3
Termistorgivare R6 Special 5 meter

High level probe R6s 20m

High level/damming probe (thermistor sensor) for ES31/OSA/OSA3
Termistorgivare R6 Special 5 meter

High level probe R6s 5m

High level/damming probe (thermistor sensor) for ES31/OSA/OSA3
Slamgivare - ES8

Sludge probe ES8

Sludge probe ES8 is an ultrasonic based, ATEX certified sludge probe for the detection of sludge, sand or other types of solid materials in tanks containing liquids, e.g. separator tanks. 5 meters. Works with separator alarm OSA/OSA 3.