Find your product

Category

Brand

Measurement principle

Application

Implementation

Measurement range

ID-221

ID-221 – oil sheen and hydrocarbon sensor

ID-221 is a Leakwise sensor for continuous detection of oil sheen and hydrocarbons on water surfaces. It is used in environmentally sensitive applications such as groundwater wells, sumps and containment areas where early alarm functionality is critical. It uses electromagnetic absorption to reliably detect oil, and can sense layers as little as 0.3mm thick. The sensor delivers continuous real-time data and alarms, making it ideal for early warning and spill prevention in environmentally sensitive areas.
ID-223

ID-223 – oil sheen detection sensor

ID-223 is a Leakwise sensor designed to detect very thin oil sheens on water surfaces. The sensor provides early warning of minor spills and is used where rapid detection of hydrocarbons is essential to limit environmental impact. Typical areas of use are oil tanks, water separators and sewage systems. The sensor can detect as little as 0.3mm of oil and monitors changes in oil levels up to 20mm. In addition, it can handle different water level variations and can be installed in hazardous environments with the help of protective pipes. The product is ideal for environmental monitoring and compliance with emission control regulations.
ID-225

ID-225 – hydrocarbon layer thickness sensor

ID-225 is a Leakwise sensor for continuous measurement of hydrocarbon layer thickness on water surfaces. It is used for monitoring oil and water separators, sumps and process water where both the presence and build-up of hydrocarbons must be tracked over time.
Many petroleum and power companies use it for monitoring and control of oil layers in typical applications such as: Remediation Control, Skim Tanks, Monitoring Oil / Water Separators and Wastewater Sewer Monitoring.
PS-220

PS-220 – analog controller for oil detection

PS-220 is an analog controller from Leakwise used to power and process signals from Leakwise oil-on-water sensors. The controller provides alarm handling, relay outputs and signal transmission for spill and leakage monitoring systems.
Ultraljud, vätskor - EchoTREK

EchoTREK for liquids

A series of ultrasonic level sensors in a compact design. 2 or 3/4 wire fed versions. Output signal 4-20 mA, HART, relay, PROFIBUS PA, depending on version. Measuring heights up to 25 m. Threaded or flanged sockets. Several different material choices on the sending part.
Slamgivare - ES8

Sludge probe ES8

Sludge probe ES8 is an ultrasonic based, ATEX certified sludge probe for the detection of sludge, sand or other types of solid materials in tanks containing liquids, e.g. separator tanks. 5 meters. Works with separator alarm OSA/OSA 3.
ASA-HLP, högnivågivare

High level probe ASA-HLP

High level/damming sensor for separator alarm ASA.
• Ultrasonic probe that detects rising liquid level in the separator.
• Provides warning when fluid level rises above preset level, indicating potential blockages in outlet or filter.
ASA-MSP, mätande slamgivare

Measuring sludge probe ASA-MSP

Measuring sludge probe for separator alarm ASA-01.
• Ultrasonic level probe that measures the level of sludge, sand and other solid materials in the separator.
• Provides detailed information on the amount of sludge for more efficient maintenance planning and emptying frequency.